Trimming The Tag End Of A Fishing Knot - How Short To Cut It

[ad_1]

In fishing, as in life, there are consequences to your actions. If you are constantly finding that your fishing knots are coming undone, then you may be causing that to happen by cutting the tag end of your fishing knot too short. How short should it be? That's exactly what you're going to discover in this article.

Let's back up a little bit and first give some definitions.

When tying a fishing knot, the "Main Line" is the end of the line that connects to your fishing reel. So this is the bulk of your fishing line. You obviously don't cut this end of the line, or you will have cut the knot you just tied clean off your line.

The "Tag End" is the short end of the fishing line that is left over after you tie a knot.

Now you could just leave the tag end as long as it is after you tie your knot and forget about trimming it altogether to avoid mistakes. But unfortunately a tag end that is too long can cause a whole new set of problems. The extra line gives your knot additional weight, as well as cause unnecessary drag in the water that can alert fish to your presence.

So as you can see, leaving the tag end untrimmed is not recommended.

My suggestion then for the tag end goes back to the basic principles of tying a fishing knot:

Tie your knot with the correct number of wraps required for the type and weight of fishing line that you are using.

Ensure that you lubricate the knot well prior to tightening it down. Using soap, rather than saliva is recommended, as it will not eat away at your line. You should keep a small squeeze bottle of dish soap in your tackle box for this purpose.

Tighten your knot properly. Using a small pair of pliers can help you tighten the knot evenly and securely. I keep a pair on a retractable cord on my fishing vest for this very purpose.

If you tighten your knot securely it will not slip and you can leave a short tag. A tag end of 1/16" to 1/8" on a securely tied knot is sufficient.

So as you can see, you may in fact have an issue with your knot tying technique, rather than the length of your tag end, that is causing your knots to come undone. Tighten it down properly and your fishing knots will never slip again.

[ad_2] Source by Pete Nalleweg

Best Choice Products

Muck Boots

Reeds Fine Jewelry, Watches and Gifts

https://4awesome.streamstorecloud.com/trimming-the-tag-end-of-a-fishing-knot-how-short-to-cut-it/?feed_id=37899&_unique_id=64b46f818bccc

The Tools You Need to Tune-Up Your Bicycle

[ad_1]

The cost of repairing a bicycle on the road can be incredibly expensive if you are not properly prepared. Regular maintenance and a home shop will go a long way in ensuring things are well done and work out properly. The first step in this is to have the proper home shop tools in place. Just a few of the basic tune up tools that every bike owner should have and a bottle of chain lubricant will make sure you are fully prepared every time you go out on the trail or road. As you continue, add tools and gear to your collection as needed to make sure that whenever a repair comes up, you have what you need to accomplish it.

The first thing you should remember is that most regular tools are not made for bicycles. Even the most expensive wrenches, screwdrivers, and pliers are built for much more durable and tougher machines than a bicycle, plus they can cost much more than standard cycling tools, so try not to spend extra money on these tools when you could easily save a few dollars and buy bike specific tools.

Tune Up Tools

The following tools will help you complete a standard tune-up on a bicycle every time before you go for a ride:

Allen Keys - Make sure you have all of the necessary sizes: 1.5mm, 2mm, 2.5mm, 3mm, 6mm, 8mm, 10mm and a long handle for those deeply seeded 9mm bolts.

Screwdrivers - Have three sizes of standard screw drivers and a small and medium Phillips.

Wrenches - Have at least one complete set of open ended metric wrenches - 8mm-19mm should be efficient.

Floor Pump - Make sure this has a built in pressure gauge.

Steel Ruler - For checking chain wear

Pliers - Have needle-nose, standard, and reversible pliers

Cutters - Diagonal cutters for cutting cables

Spoke Wrench - Make sure this is a three-way to fit all sizes of nipples.

Pedal Wrench - Make sure you pick up one that matches a headset wrench to save yourself some money.

Crank Bolt Wrench - A good option for those without allen bolts.

Third Hand Tool - This helps when you work on your brakes.

Chainring Nut Wrench - The easiest tool you will find - comes in one-size-fits-all.

Other Possible Tools You Might Use

While the above list is good for any standard tune-ups, it will be insufficient if something breaks and you need to start making major repairs to your bicycle. The following tools might need to be purchased at a later day to provide additional repair assistance when working on your bike.

Chain Rivet Tool

Cassette Lockring Tool

Crank Extractor

Deraileur Hanger Tool

Cone Wrenches

Chain Whip

Tire Levers

Sealed Bottom Bracket Tool

Flat Line

Mallet

Adjustable Wrenches

Bottom Bracket Lockring Tool

These tools will all go a long ways toward making sure your bicycle keeps operating on a regular basis without any issues every day you take it out for a ride.

[ad_2]

Source by Kevin Kenne

Bicycle Tools

Tire Pumps

Walkie Talkies

Indoor-Outdoor Grills

Fishing Rods and Reels

https://1home.streamstorecloud.com/the-tools-you-need-to-tune-up-your-bicycle/?feed_id=37764&_unique_id=64aad3c9bd969